Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Boulder City
If you live in Boulder City, there’s a decent chance your garage was built before your parents were born. The townsite bungalows from the Hoover Dam years came with narrow, low-clearance single-car bays, and the springs, cables and seals on those doors are running decades past their rated service life. We stock and fit the parts those openings actually need: vintage hardware, shim kits, low-clearance components and custom-cut seals. Call (855) 517-0284 and a live person answers, day or night. We’ll name the price range before anyone touches the door.

Why Servo Garage Doors Winchester Is Boulder City’s Preferred Garage Door Parts Company
Boulder City homeowners research before they call. We built the company around that habit. Every job starts with a flat, written price and written scope delivered before any work begins, which is Clause 1 of The Haven Standard, and it closes with a documented photo record of what we found and what we did. Clause 4 is why the technician photographs the failed component before quoting a replacement: you see the cracked drum or the snapped coil yourself, not a handshake promise.
Our technicians have up to 11 years of experience, and they know what Boulder City garages look like on the inside: original one-piece doors, mid-century sectional retrofits, and everything in between. Calls are answered by a live person 24/7, including emergency garage door calls, with a named technician and an on-the-way text rather than a callback window. If you have a written estimate from another company, bring it. The free second opinion applies, and we don’t need a coupon or code.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Boulder City

These are the parts we replace most often in Boulder City’s older homes. Each comes with a written price before work starts, and each is covered by the 365-Day Done Right Promise.
Torsion Spring Repair in Boulder City
On a townsite bungalow, a legacy torsion spring that’s cycled for decades will eventually snap, and the door drops hard because the spring, not the opener, carries the weight. A torsion spring is the coiled shaft-mounted spring that does that lifting. A typical torsion spring repair in Boulder City runs $180 – $340. Spring repair is dangerous work: the stored tension in a wound spring can cause serious injury, so this is a job for a trained technician, not a weekend project.
Extension Spring Repair in Boulder City
Many of the older garages here still run extension springs, the stretch-style springs mounted above the horizontal tracks, and when one lets go it can whip toward the opener rail. We measure the wire gauge and check the safety cables before quoting. Extension spring repair in Boulder City also sits at $180 – $340 depending on the door and the hardware that comes with it.
Cables & Drums Repair in Boulder City
Desert heat dries out and cracks the steel cables and the drums they wind onto, and a frayed cable is a door that can drop without warning. We inspect both drums and the end bearing plates on every Boulder City spring call. Cable and drum repair in Boulder City runs $130 – $250. Like springs, cables carry stored tension under load and should only be handled by a trained professional.
Rollers & Hinges Replacement in Boulder City
Narrow, low-clearance tracks wear rollers faster because there’s less margin for slop. We replace worn nylon and steel rollers and the hinges that start squealing after a few dry summers. Roller replacement in Boulder City runs $110 – $220, and it’s one of the cheapest ways to quiet a door that rattles every time the opener fires.
Before
AfterTrusted Brands We Service in Boulder City
We work on the openers and doors that Boulder City garages actually have: LiftMaster and Chamberlain units on the newer retrofits, plus plenty of Craftsman openers still driving original doors, and Raynor hardware on the mid-century additions. We don’t claim to stock every brand’s parts on a shelf. What we do is source the right component for your door’s make and vintage, then fit it and hand you the written scope and photo record. That turnaround matters here because the nearest big-box parts supply is roughly 30 miles away in Henderson, so a wrong guess costs you a second trip.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Parts Problems We See in Boulder City Homes

- Decades-old springs that finally snap. Original torsion and extension spring assemblies on 1930s – 40s townsite garages give out well past their rated cycles, leaving a door that hangs crooked or drops hard.
- UV and heat cracking the seals. Boulder City sits at about 2,500 feet in the Mojave Desert with summers over 100°F, which dries out wood panels and cracks the rubber bottom seal and weatherstripping long before the door itself fails.
- Non-standard openings rejecting off-the-shelf parts. The narrow, low-clearance bays here often won’t take a standard 9-foot-wide door or a modern trolley opener, so we shim tracks and order low-clearance hardware instead of forcing a fit.
- Openers straining under a heavy legacy door. When the door still moves but the opener groans, the springs are usually the culprit, not the motor, and replacing the opener alone won’t fix it.
Pricing for Garage Door Parts in Boulder City, NV
Here’s what the parts work actually costs in Boulder City’s market, in dollars, before you pick up the phone. Every price is quoted and agreed in writing before any work starts, and it doesn’t move once the technician is standing in your garage.
| Service | Boulder City Price Range |
|---|---|
| Torsion or extension spring repair | $180 – $340 |
| Cables & drums repair | $130 – $250 |
| Roller replacement | $110 – $220 |
| Bottom seal / weatherstripping | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Weatherstripping and bottom seal replacement is one of the most common jobs on the older homes here, and it’s a case of the sun doing the damage. If you’ve priced a competing written estimate, bring the paperwork and we’ll give you a free second opinion.
We Also Serve Cities Near Boulder City

Boulder City sits on the edge of the valley, and we also connect homeowners with Garage Door Parts service for the surrounding communities, including Henderson, Whitney, Paradise and Enterprise. If you’re just outside the Boulder City line and wondering whether we reach you, call and ask. We’ll tell you straight. See our Garage Door Parts in Boulder City hub for the full local picture.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Boulder City

Springs fail fast in Boulder City because the desert heat and intense sun accelerate metal fatigue and dry out the components that protect them, so a spring here cycles out sooner than the same spring in a cooler climate. Springs are rated in cycles, and decades on an original spring means it’s living on borrowed time. Call (855) 517-0284 for a free estimate and a written range.
Often a standard trolley opener won’t fit, but a low-clearance jackshaft opener usually will. The shallow, narrow bays from the townsite era leave little headroom, so the opener mounts on the side of the torsion shaft instead of hanging from the ceiling. Opener installation in Boulder City runs $250 – $550, quoted in writing first. Call for a free measure and a written price.
Rarely off the shelf, because the standard 9-foot-wide, 7-foot-high openings parts are sized for today don’t match these older bays. We stock shims, low-clearance hardware and custom-fit seals, and we source vintage-sized components when needed. The nearest big-box supply is about 30 miles away, so getting the fit right the first time matters. Call for a quote before ordering anything.
It’s almost always the springs. The springs carry the door’s weight and the opener just guides it, so when they weaken the motor works harder and groans. A technician checks spring cycles, drums and end bearing plates before recommending a new opener. Call (855) 517-0284 for a free estimate.
Repair the hardware when the door panels and track are sound, and retrofit when the spring, seal and rail have all reached their end at once. A spring repair at $180 – $340 or weatherstripping at $110 – $220 is often all a solid legacy door needs, while a full retrofit runs higher. We’ll photograph what we find and put the written scope in front of you so the decision is yours. Call for a free second opinion on any estimate.
Whether your Boulder City garage needs a snapped spring replaced, a cracked seal swapped out, or a low-clearance opener that finally fits a Depression-era bay, the next step is the same: call (855) 517-0284 for a free estimate. You’ll get a flat, written price and written scope before any work starts, a background-checked technician on the job, and a documented photo record when we leave. Estimates are free, calls are answered by a live person 24/7, and the price is agreed before we touch the door.
Written by the team at Servo Garage Doors Winchester.