Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Sunrise Manor
If your door won’t lift, reverses halfway, or hums without moving, the part that failed is usually a spring, a cable, a drum, or a stripped opener gear, and we can name it for you before anyone quotes a replacement. Servo Garage Doors Winchester handles garage door parts across Sunrise Manor, including the 89110 ZIP, with live phone coverage 24 hours a day and same-day emergency calls answered by a real person. We know this suburb’s ranch tracts and the way the afternoon sun cooks a west-facing door. Call (855) 517-0284 and we’ll get a technician to you with a written price before any work starts.

Why Servo Garage Doors Winchester Is Sunrise Manor’s Preferred Garage Door Parts Company
Sunrise Manor homeowners research before they call, and that suits us. Every job carries a flat, written price and a written scope before the technician touches the door (Clause 1 of The Haven Standard), and every visit closes with a documented photo record of what was found and what was done. That record traces back to the rule Servo was built on: you see the failed part before anyone quotes a replacement. Clause 4 is why the technician photographs a snapped spring or a worn drum before recommending a swap.
Our technicians have up to 11 years of experience, are background-checked and uniformed, and the license number is printed on the page rather than buried in fine print. We’ve made 18,000+ garage doors right since 2015, each one with a written price before work started. Response to Sunrise Manor is quick because it sits right in the middle of the metro core we cover, and emergency door calls here get a named technician and an on-the-way text, not a callback window. If a repair isn’t right, the 365-Day Done Right Promise means we make it right. Bring a written estimate from another company and we’ll give you a free second opinion on the paperwork.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Sunrise Manor

Most of what we fix in Sunrise Manor comes down to four components. Here’s how each one behaves in this neighborhood, and what a real repair looks like.
Torsion Spring
The torsion spring is the coiled steel bar above the door that counterbalances its weight, and it’s the part we replace most in Sunrise Manor. On the 1960s – 1990s tract homes here, an original spring is often 20+ years old and has snapped or lost tension. These are high-tension parts under serious load, and we don’t recommend handling them yourself; a trained technician checks the wire diameter and cycle count and fits a high-cycle replacement matched to the door.
Cables & Drums
Cables run from the bottom corners to the drums at the ends of the torsion bar, and drums are the spools the cables wind onto. When a spring lets go, a cable often frays or a drum bends at the same time. In Sunrise Manor we check both on every spring call, because a new spring on a worn drum just fails again. It’s a load-bearing system, so this stays in trained hands.
Rollers & Hinges
Rollers are the wheels that ride the track, and hinges are what join the door panels. After a monsoon wind-dust event, grit packs into tracks and rollers and the whole door binds, which can look like a dead spring. In Sunrise Manor’s dusty stretches we swap worn nylon rollers and stiff hinges so the door travels clean again.
Weatherstripping & Bottom Seal
The bottom seal is the rubber strip along the door’s lower edge, and weatherstripping seals the sides and top. Intense UV and 100°F-plus summers crack these fast, letting dust and heat into the garage. New seals keep grit out of the tracks and cut the heat load on the opener. We fit seals sized to standard 16×7-foot single and double-car doors, which covers most of the housing stock here.
Before
AfterTrusted Brands We Service in Sunrise Manor
We service LiftMaster, Chamberlain, Genie, Raynor, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor across Sunrise Manor, from older Craftsman openers on 1980s doors to newer LiftMaster and Chamberlain units with belt or chain drives. We don’t claim to stock parts locally or keep a warehouse; what we do is identify the exact component, source the right replacement, and get it fitted without guesswork. Because we work with all the major brands, an older Raynor or Genie door doesn’t leave you stuck hunting discontinued parts on your own. Fast turnaround on the common failures, and a clear answer when a legacy part really is past saving.
Common Garage Door Parts Problems We See in Sunrise Manor Homes

These are the failures that show up again and again in this suburb, and each one has a local cause worth knowing.

- Original torsion springs snapping early. Springs on 1970s – 1990s doors here often break before hitting their rated 10,000 cycles, because relentless UV and 100°F-plus heat cycling wear the steel faster than the spec assumes.
- Stripped opener gears and failing photo-eye sensors. Garages that regularly hit 120°F stress the opener’s plastic gears and the photo-eye sensors (the safety beam across the opening), especially on west-facing doors that bake all afternoon.
- Grit-packed tracks and rollers after a dust storm. Monsoon wind-dust packs grit into tracks and rollers, causing binding that mimics a spring failure and jams openers across entire blocks.
- Cracked bottom seals and weathered panels. The same sun that kills springs fades steel and rusts panel edges, and it cracks bottom seals within a few seasons, letting dust and heat straight into the garage.
The Sunrise Manor Sun Problem: Why Doors Here Fail on a Different Schedule
Here’s the local detail a generic parts page misses. Sunrise Manor is a mid-century-to-1990s tract suburb built almost entirely with attached two-car garages, and a lot of those garages face west or southwest, catching the full afternoon sun off Charleston and Lamb. That west-facing orientation changes the wear math. A torsion spring is rated for a set number of cycles, but heat stress and UV on a sun-baked door push the steel toward failure before it ever reaches that count, so an original spring here often snaps years earlier than the same spring on a shaded door elsewhere in the Valley. The fix isn’t just any spring; it’s a high-cycle replacement chosen with that heat load in mind. Factor in that garage interiors hit 120°F in summer, stressing opener motors and remote batteries, and you get a community where the door is genuinely load-bearing for daily life: this is one of the most garage-dependent places in the country, and a broken door walls off the car you need to commute to the Strip. That’s why we check balance, drums, and cables on every spring call in Sunrise Manor rather than swapping one part and leaving.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Parts in Sunrise Manor, NV

We put the ranges on the page because a written price before work starts is the whole point. A typical torsion spring replacement in Sunrise Manor runs $180 – $340, and cable repair lands at $130 – $250. Roller replacement is $110 – $220, and weatherstripping or bottom seal work is $130 – $250. Where a job sits in the range depends on the part, the door’s size and age, and whether related wear needs attention at the same time. What doesn’t move is the process: you get a flat, written price and written scope agreed before any work starts, so the number on the invoice is the number you approved. Estimates are free. Call (855) 517-0284 and we’ll quote it.
Sunrise Manor Parts Pricing at a Glance
| Part / Service | Price Range |
|---|---|
| Torsion Spring replacement | $180 – $340 |
| Cable repair | $130 – $250 |
| Roller replacement | $110 – $220 |
| Weatherstripping / bottom seal | $130 – $250 |
We Also Serve Cities Near Sunrise Manor
We cover the neighborhoods around Sunrise Manor too, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside the 89110 boundary, the same written-price-first system and documented photo record apply. Learn more about our Garage Door Parts in Sunrise Manor coverage, or reach the wider Garage Door Parts team for the full service list across the metro.
Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Sunrise Manor
Go with a high-cycle spring. On a west-facing door that bakes in the afternoon sun, heat stress shortens spring life below its rated cycles, so a high-cycle replacement buys you noticeably more service than a standard one. The technician will measure wire diameter and check cycle count to size it correctly. Call (855) 517-0284 for a written quote before any work starts.
Usually the opener is fine and the door is fighting it. In garages that hit 120°F, opener gears strip, and a door whose springs lost tension in the heat makes the motor work against dead weight, so it hums without lifting. A technician checks spring balance and opener gears together, because fixing only one leaves the other to fail. Call (855) 517-0284 and we’ll diagnose it with a written price in hand.
The rollers, hinges, and tracks are the usual culprits. Wind-dust packs grit into the tracks and rollers, so the door binds and the opener jams even though the springs are intact. Cleaning and swapping worn rollers and stiff hinges usually restores smooth travel. Call (855) 517-0284 and we’ll inspect it the same day.
Often yes for common parts, and sometimes no for discontinued hardware. We service the major brands and can usually source rollers, hinges, cables, and seals for older doors, but when a legacy opener or one-piece door is truly past its service life, a retrofit or replacement is the honest answer. Call (855) 517-0284 and we’ll tell you which side of that line your door is on, with a written price either way.
Weatherstripping and bottom seal work typically runs $130 – $250 in Sunrise Manor. It fails fast because UV and 100°F-plus summers crack the rubber within a few seasons, and the same sun that bakes the seal fades panels and rusts edges. New seals keep dust out of the tracks and ease the load on the opener. Call (855) 517-0284 for an exact quote; estimates are free.
Get Your Sunrise Manor Garage Door Fixed Right

Whether it’s a snapped torsion spring on a 1980s door, a stripped opener gear, or a bottom seal cracked by the sun, the part that failed can be named, quoted, and fixed. You’ll get a written price and written scope before work starts, a background-checked technician, and a documented photo record when the visit ends. For anything from a single spring to a legacy-door retrofit in Sunrise Manor, call (855) 517-0284 for a free estimate.
Written by the team at Servo Garage Doors Winchester.